Factory Field Notes: Hot-Dip Galvanizing & Structural Steel Production
At Xuzhou Kejulixin Machinery Equipment Manufacturing Co., Ltd., maintaining transparent quality control and robust operational safety is integral to our daily manufacturing routine. Our production workshop is designed to handle heavy industrial steel components, roadside crash barriers, C/Z purlins, and steel gratings with precision surface treatment.
Through continuous investments in specialized forming machinery and eco-friendly hot-dip galvanizing technology, our facility maintains a clean, safe, and efficient workflow from raw material punching to final immersion coating.
1. Cold Forming & Stamping Operations
Our plant features a dedicated Stamping area where specialized forming equipment shapes steel pipes, guardrail beams, and structural sections before corrosion protection treatments are applied.
To manage high-volume raw material movements and heavy finished fabrications safely, the workshop bay is serviced by heavy-duty bridge cranes, including a unit rated at 28t lifting capacity. Operators in the stamping zone follow strict factory safety protocols, wearing protective helmets and standard industrial safety gear while running precision punching and bending equipment.
Operator handling metal pipe forming in the designated Stamping area.
2. Intelligent Hot-Dip Galvanizing Lines in Action
The hot-dip galvanizing process serves as the primary protective barrier against atmospheric corrosion for structural steel products. Operators monitor line controllers with real-time digital readouts, such as system temperature displays showing 449 during continuous bath monitoring.
Technicians wearing full PPE including face shields, supervising beam dipping.
Precision angled hanging of C-channel profiles over the galvanizing bath.
During the galvanizing cycle, components are suspended at controlled angles using specialized riggings and overhead hoists. This angled hoisting strategy ensures uniform zinc flow across outer surfaces and inner hollow cavities, minimizing air pockets and achieving consistent coating thickness across the entire steel profile.
3. Production Facilities & Equipment Specifications
Key specifications and production assets utilized at Xuzhou Kejulixin Machinery Equipment Manufacturing Co., Ltd.:
| Equipment / Line Type | Dimensions / Specifications | Operational Purpose |
|---|---|---|
| Standard Zinc Pot (Line A) | 7m * 1.5m * 2.2m | Hot-dip galvanizing of standard structural sections and short columns |
| Standard Zinc Pot (Line B) | 13.2m * (1.8-2.3m) * 2.8m | Large-capacity immersion bath for long beams and heavy fabrications |
| Overhead Crane System | 28t lifting capacity | Heavy steel coil handling and large-scale bundle transportation |
| Forming Production Lines | Guardrail board line, M/C column line, round tube column line, steel grating line | Dedicated roll forming and automated component manufacturing |
Quality Control & Inspection Protocol
- Pre-treatment Check: Steel surfaces are inspected for oil, mill scale, and structural alignment prior to pickling and dipping.
- Immersion Angle Rigging: Slotted profiles and tubes are angled precisely during dipping to permit complete zinc immersion and smooth liquid drainage.
- On-Site Safety Compliance: All technicians wear protective helmets, gloves, and protective face shields when working near zinc kettle enclosures.