Progressive Beam Lowering Terminal End Section with Deformable Energy Absorption and Left Hand or Right Hand Directional Build for Thrie Beam Guardrail
Product Details
| Matched Beam: | Thrie Beam, Three Wave | Terminal Length: | 6000mm / 9000mm |
|---|---|---|---|
| Steel Grade: | Q235B / Q345B | Plate Thickness: | 4.0mm |
| Anchorage: | Cast Or Driven Anchor Block Per Drawing | Zinc Coating: | Hot Dip, Min 600 G/m2 |
| Direction: | Left Hand Or Right Hand | Standard: | AASHTO M180, ASTM A123 |
| Highlight |
Progressive Beam Lowering Terminal End Section,Deformable Energy Absorption Guardrail Terminal,Left Hand Right Hand Energy Absorbing Terminal |
||
Product Description
The terminal end section is the part of a thrie beam barrier that decides how a crash ends rather than how it begins. Instead of stopping abruptly at a cut plate, the terminal lowers the beam progressively to ground level over six to nine metres and uses deformable steel elements to absorb energy, so a vehicle striking the end is decelerated smoothly and redirected rather than being speared or stopped dead. End impacts are among the most severe crash types on expressways, and a properly detailed terminal is what keeps a barrier line from becoming a hazard at its own terminus.
Key Features- Matched thrie beam geometry: the terminal is cold roll-formed from the same triple wave section as the main barrier, so the transition from thrie beam to terminal is continuous and there is no step for a wheel to catch.
- Progressive beam lowering: the section slopes to ground level over its length, guiding the beam below bumper height gradually instead of terminating in an exposed end.
- Deformable energy absorption: steel elements yield in sequence on impact, absorbing energy over a longer distance and reducing peak deceleration on occupants.
- Directional build: left hand and right hand versions are produced and marked separately, so the terminal is always installed with the correct approach geometry.
- 600 g/m2 galvanizing: terminal beams, brackets and anchor plates are hot dip galvanized after fabrication, which matters most at the ground line where moisture and soil contact concentrate corrosion.
- Complete set supply: beam, anchor brackets, connection bolts and layout sheet arrive as one crate, so the site team does not improvise a connection at the most safety critical point in the line.
| Parameter | Specification |
|---|---|
| Matched barrier | Thrie beam, three wave |
| Terminal length | 6000mm or 9000mm |
| Steel grade | Q235B standard, Q345B on request |
| Plate thickness | 4.0mm |
| Anchorage | Cast concrete block or driven anchor per drawing |
| Zinc coating | Hot dip, minimum 600 g/m2 |
| Handing | Left hand or right hand, marked on crate |
| Fasteners | M16 galvanized bolts, grade 8.8 |
| Standard | AASHTO M180, ASTM A123 |
Terminals are installed at every point where a thrie beam barrier begins or ends: the upstream end of a median barrier, the nose of a bridge approach, the start of a rural section leaving a junction, and the run-out where a barrier line stops short of a culvert, sign gantry or property boundary. They are also used at the upstream end of barrier transitions where a W beam section changes to thrie beam and the containment level steps up.
Packaging & Quality AssuranceEach terminal ships as a crated set: the formed terminal beam, anchor brackets or anchor plate, connection bolts and a layout sheet showing approach direction, anchor position and splice detail. Crates are marked left hand or right hand and labelled with the matching barrier line reference so the correct handing reaches the correct end of the job.
Production checks cover section geometry against the thrie beam profile, plate thickness, slot position and zinc coating mass, with particular attention to the ground line area where the beam is closest to soil. Coating reports and dimensional sheets are issued with each lot. Because the terminal is a safety critical component, we recommend and support client inspection before dispatch, and can supply pre-shipment photographs of the assembled set.
Product Highlights
Energy absorbing terminal end section for thrie beam guardrail, cold roll-formed and galvanized, lowers the beam to ground level at the barrier run-out.
Hot Dip Galvanized Steel Grating Checkered Plate Compound Heavy Duty Grating
Hot Dip Galvanized Composite Steel Grating | Checkered Plate Compound Grating Product Overview Hot Dip Galvanized Composite Steel Grating is a high-performance sealed steel flooring and drainage solution combining a welded steel grating base with a galvanized checkered anti-slip plate through full ...
Hot Dip Galvanized Q235 Steel Two Wave Guardrail AASHTO M180 Road Safety Guardrail
Hot Dip Galvanized Q235 Steel Two Wave Guardrail AASHTO M180 Road Safety Guardrail Galvanized W-beam Guardrail Two Wave Guardrail, also known as Double Wave W Beam Guardrail, is a semi-rigid traffic safety barrier widely used for highways, roads, bridges, ramps, parking lots and scenic areas. It is ...
Progressive Beam Lowering Terminal End Section with Deformable Energy Absorption and Left Hand or Right Hand Directional Build for Thrie Beam Guardrail
Energy absorbing terminal end section for thrie beam guardrail, cold roll-formed and galvanized, lowers the beam to ground level at the barrier run-out.
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.