logo
Quality 150x150mm Square Guardrail Post Hot Dip Galvanized Highway Guardrail Post with 4.5mm or 6.0mm Wall Thickness factory
<
Quality 150x150mm Square Guardrail Post Hot Dip Galvanized Highway Guardrail Post with 4.5mm or 6.0mm Wall Thickness factory
>

150x150mm Square Guardrail Post Hot Dip Galvanized Highway Guardrail Post with 4.5mm or 6.0mm Wall Thickness

Brand Name: Kejulixin
Model Number: KJL-SP150
Place of Origin: Jiangsu, China
Certification: ISO 9001:2015
Minimum Order Quantity: 100 Pieces
Price: USD 12-26 / Piece
Supply Ability: 30000 Pieces per Month

Product Details


Post Section: Square Hollow Section 150x150mm Wall Thickness: 4.5mm / 6.0mm
Steel Grade: Q235B / Q345B Standard Length: 1800mm / 2000mm / 2400mm
Zinc Coating: Hot Dip, Min 600 G/m2 Hole Diameter: 18mm Drilled For M16
Post Cap: Steel Cap, Welded Or Push Fit Standard: AASHTO M180, ASTM A123
Highlight

150x150mm Square Guardrail Post

,

Hot Dip Galvanized Highway Guardrail Post

,

4.5mm Wall Thickness Square Guardrail Post

Product Description

The square guardrail post in 150x150mm hollow section is the rigid support that carries W beam and thrie beam plates where a round post is either unsuitable for the connection detail or not accepted by the specifying authority. Because the flat faces present a true vertical plane, blockouts and spacers seat without the point contact that appears on curved sections, which keeps the beam at the design height and spreads impact load into the footing rather than into the bolt heads.

Key Features
  • Flat mounting faces: a 150x150mm square section gives full face contact for blockouts and rail brackets, so bolt torque stays stable and the beam does not rotate under load.
  • Double wall options: 4.5mm wall for standard highway sections and 6.0mm wall for high containment layouts, bridge approach and median applications where post deflection must be limited.
  • 600 g/m2 hot dip galvanizing: applied after drilling and welding, sealing the inside of the hollow section, which is the first place a painted or poorly vented post fails.
  • Pre-drilled to drawing: slot and hole positions are drilled on CNC lines to the client's blockout detail, so posts arrive ready to set rather than being drilled on site.
  • Vented and drained: each post carries vent and drain holes positioned so that galvanizing covers the internal surface and no trapped air or water remains after installation.
  • Cap and marking: steel caps are fitted before packing to stop water ingress, and post batches are marked by length and wall thickness for quick site sorting.
Technical Specifications
ParameterSpecification
SectionSquare hollow section 150 x 150mm
Wall thickness4.5mm standard, 6.0mm heavy duty
Steel gradeQ235B standard, Q345B on request
Standard length1800mm, 2000mm, 2400mm
Embedment depth1100-1400mm depending on soil class
Hole diameter18mm for M16 fasteners, slotted on request
Zinc coatingHot dip, minimum 600 g/m2
Post capWelded steel cap or push fit plastic cap
StandardAASHTO M180, ASTM A123
Applications

Square posts are used on national highway widening schemes, bridge approach barriers, toll lane separations, industrial park roads and container terminal perimeters. They are also the usual choice where a client specifies a bolted-on blockout detail or a rail bracket that cannot be clamped to a round tube. In hard ground and rock conditions the flat section is easier to set true, which reduces post plumb corrections before beam installation.

Packaging & Quality Assurance

Posts are packed in straight bundles of 20 to 30 pieces by length, steel strapped at three points, with end caps fitted and bundle labels showing section, wall thickness and hole pattern. Bundles are loaded on timber dunnage so the galvanized surface is not abraded in transit, and mixed-length bundles are avoided unless the client requests them.

Every production run is checked for section size, wall thickness, straightness and hole position, and coating mass is verified on samples from each galvanizing batch. Weld quality on caps and any bracket attachments is inspected visually against the approved drawing. Mill certificates, zinc mass reports and dimensional sheets are issued per lot, and posts can be held for client or third party inspection before dispatch on request.

Product Highlights

150x150mm square hollow section guardrail post in Q235B, hot dip galvanized 600 g/m2, pre-drilled for W beam blockouts, supplied with caps.

Related Products
Quality Hot Dip Galvanized Steel Grating Checkered Plate Compound Heavy Duty Grating factory

Hot Dip Galvanized Steel Grating Checkered Plate Compound Heavy Duty Grating

Hot Dip Galvanized Composite Steel Grating | Checkered Plate Compound Grating Product Overview Hot Dip Galvanized Composite Steel Grating is a high-performance sealed steel flooring and drainage solution combining a welded steel grating base with a galvanized checkered anti-slip plate through full ...

Quality Hot Dip Galvanized Q235 Steel Two Wave Guardrail AASHTO M180 Road Safety Guardrail factory

Hot Dip Galvanized Q235 Steel Two Wave Guardrail AASHTO M180 Road Safety Guardrail

Hot Dip Galvanized Q235 Steel Two Wave Guardrail AASHTO M180 Road Safety Guardrail Galvanized W-beam Guardrail Two Wave Guardrail, also known as Double Wave W Beam Guardrail, is a semi-rigid traffic safety barrier widely used for highways, roads, bridges, ramps, parking lots and scenic areas. It is ...

Quality Progressive Beam Lowering Terminal End Section with Deformable Energy Absorption and Left Hand or Right Hand Directional Build for Thrie Beam Guardrail factory

Progressive Beam Lowering Terminal End Section with Deformable Energy Absorption and Left Hand or Right Hand Directional Build for Thrie Beam Guardrail

Energy absorbing terminal end section for thrie beam guardrail, cold roll-formed and galvanized, lowers the beam to ground level at the barrier run-out.

Quality Galvanized Steel Blockout Spacer Assembly Guardrail Bracket with 6mm Thickness and M16 Bolts for Highway Barrier Fasteners factory

Galvanized Steel Blockout Spacer Assembly Guardrail Bracket with 6mm Thickness and M16 Bolts for Highway Barrier Fasteners

Galvanized blockout and spacer assembly for W beam and thrie beam guardrail, supplied as a kit with M16 bolts, nuts and washers.

Request A Quote

Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.

You can upload up to 5 files and Each file sized 10M max.